Epoxy Coating Lab Steel Fume Hood

Name:Epoxy Coating Lab Steel Fume Hood

 Standrad Size: (W*D*H: mm)

1200*800*2350
1500*800*2350
1800*800*2350
 
Other material for choice: 
stainless steel, steel and wood, PP, FRP
 

Product Description

Product Description


  1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 

2.Inside Lining: 4mm thickness of Compact.
 
3.Worktop: 12.7mm chemical-resistant laminate, install with a hurdle to prevent spillage of liquid.
 
4.Sash: 6mm of tempered glass.
 
5.Sash Handle: 2mm Cold-rolled steel powered with epoxy coating.
 
6.Illumination: with not less than 300 Lux 30W fluorescent lamp set.
 
7.Cupsink: Oval shaped PP Cupsink
 
8.Water Tap: Molded in one piece copper water tap, epoxy powder coating surface with a ceramic valve.
 
9.Exhausting Duct: Anti-corrosion Fiberglass duct.
 
10.Technical specification: Noise: less than 60db (International standard)
 
11.Face velocity: 0.5m/s
 
12.Function: With an intelligent automatic delay protection device to exhaust residual corrosion air completely and prolong the service time of fume hood.


 

Optional accessories

Worktop

Phenolic resin worktop

Epoxy resin worktop

Ceramic worktop

Stainless steel worktop

Tempered worktop

Movable base cabinet

PP cup sink (embedded in the worktop)

Fan

Wind valve

Water valve

Gas valve

Compressed air valve


 
 【Print】 
Pre: FHAS-0114       Next: [Next : FHAS-0110]→ /div>